FOSHAN AQUA GEL BIOTECH CO.,LTD.

Model: 410
Specifications: 10 / bag
Approval: two instruments

[product name] disposable medical mask
[model, Specification] TNK-KZ
[packing] 1 / bag, 2 / bag, 8 / bag, 10 / bag, 10 / box
[name] production enterprises Shantou city Kang Medical Equipment Factory Co. Ltd. taen
[address] registered two street Taishan road Longhu District of Shantou City Kyrgyzstan million plant No. 8 (a), the two layer and building B, three, four, five
[address] production two street Taishan road Longhu District of Shantou City Kyrgyzstan million plant No. 8 Building B, four, five
Contact telephone number: 0754-88592271
[] customer service service unit of Shantou City Medical Equipment Factory Co. Ltd. taen
[production license number] Guangdong food and Drug Administration machinery production permit 20020542
[Registration Certificate] Guangdong Machinery injection 20162640663
[product technical requirements] Guangdong Machinery injection 20162640663
[revised date] May 20, 2016
The product structure is made of non-woven cloth and other materials, and then sterilized by ethylene oxide
[product performance]
1 the basic size of the mask: the size of the central part of the mask after the expansion of the size of not less than 17cm, the width is not less than 15cm.
2 appearance: appearance should be correct, the surface should be clean, no smell, there should be no damage defects
3 Structure: Mask spray rating should not lower than GB3 grade GB/T4745; mask must be equipped with a nose clip, nose clip is made of flexible plastic material, the length of not less than 8.5cm; should wear a mask with convenience, should be of sufficient strength to the fixed mask position, each mask with breaking point connected with the mask body the strength should not be less than 10N.
4 particle filtration efficiency: the filter should not be less than 30%.
5 respiratory resistance: respirator respiratory resistance should not exceed 49Pa.
6 sterility: it should be sterilized by a defined sterilization process
7 ethylene oxide residue: after sterilization for 14 days, the residual ethylene oxide should not exceed 10 g/g.
Applicable to the health care of the wearer in an ordinary medical environment where there is no fluid and splash risk
[method] in the mouth, nose
Contraindications [no]
Notes, warnings and tips
1 the product is sterilized by ethylene oxide for a period of 24 months
2 only for one time use, after destruction
3 the packing is broken, forbid to use
Special storage conditions and methods stored in the relative humidity of not more than 80%, non corrosive gas and ventilated room, to avoid high temperature
[production date and batch] see seal
The term of validity shall be stored under the prescribed conditions, and the period of validity shall be 24 months